Category: News

Newstungstenmolybdenummetals is a professional news and article media center for new materials, nano materials, chemical company, machinery, digital products, indusitrial products and more. Newstungstenmolybdenummetals has a professional editorial and researching team that provides qualified and authentic content on the internet. We also have laboratory and R&D resources for advanced Nano material / New material research and experiment. Our topics: nanoparticles, graphite powder, boron powder , zinc sulfide , nitride powder, Molybdenum disulfide,silicon powder,max phases powder, quartz powder, 3D printing metal powder, and so on.

Spherical Quartz Powder Properties And Applications

Spherical quartz powder It is made by using a carefully selected, irregular-angled, silicon micropowder for the raw material. Then, it is shaped into a round shape with flame melting to get a silica powder that has a low stress, good fluidity, small specific surface, and a small amount of surface area.

Spherical Quartz Powder Properties

Spherical Quartz Powder has excellent properties including a smooth surface and a large surface area. It is also hard, stable, and has a high degree of chemical resistance.
First, the spherical granules are well-mixed with the resin and form a thin film. The resin content is low, while the quartz powder amount is high. This can result in a mass fraction of up to 90.5%. The more quartz powder that is added to the mold, the less thermal conductivity it has and the smaller its thermal expansion coefficient. The performance of electronic components is improved when they are closer to monocrystalline silicon’s thermal expansion coefficient.

Second, spherical quartz has the lowest stress and highest strength.

Finaly, the spherical shaped powder has a smooth, non-abrasive surface with a low coefficient of friction. It also wears the mold less, which increases its service life by a factor of two.

Spherical quartz powder applications

It has many applications. However, its main market is electronic packaging. Electronic packaging is an important industry that supports integrated circuits. The packaging requirements are increasing as integrated circuits get larger and more sophisticated.

Microelectronic packaging requires a high level of moisture resistance, low radiation, low stress and resistance to dip or reflow soldering. Also, the plastic seal must be good after the integrated circuit has been packaged. Spherical Quartz Powder is an essential support material for EMC. Not only does it need to have a particle size that meets the packaging range, but its purity and radioactive element content must also be low.

Quartz powder, which is spherical in shape, can be used for a variety of purposes, including electronic packaging. It can also be used as a filler in paints or coatings.

Tech Co., Ltd. is a professional oxide powder We are a chemical product supplier with 12 years experience. We accept payment by Credit Card, T/T (West Union), Paypal and T/T. The goods will be shipped to overseas customers via FedEx or DHL.

You can contact us for spherical quartz spherical powder of high quality. Contact us Send an inquiry.

Spherical quartz powder It is made by using a carefully selected, irregular-angled, silicon micropowder for the raw material. Then, it is shaped into a round […]

Advantages of Aluminum Nitride Cte As a Buffer Layer for HEMTs

aluminum nitride cte (AlN) is an aluminum nitride based material that has recently received significant interest due to its superior performance as a buffer layer for nitride-based high electron mobility transistors (HEMTs). As compared to oxides like Al2O3, AlN has better thermal management properties which lead to reduced buffer leakage, allowing the integration of n-channel and p-channel devices on the same device.

The material has been characterized with high thermal conductivity up to 260 W/(m*K) and electrical insulation properties that are comparable with beryllia oxide (BeO). In addition, it is non-toxic, which eliminates the need to handle toxic and hazardous vapors when grinding or machining. Its low coefficient of thermal expansion is also an attractive feature.

The insulating and conductivity characteristics of the material are partly explained by its structure. It is a polycrystalline material exhibiting the low-temperature wurtzite crystal structure with lattice constants c and a and atomic arrangement in the form of interpenetrating, closest packed metal and nitrogen atoms in the AB4 tetrahedra. The wurtzite crystal structure is stable at low temperatures and can be converted to the metastable cubic zincblende phase at elevated temperature by applying external pressure.

The material is well-suited for a wide variety of applications. It has a high oxidation resistance, chemical resistance and mechanical strength. It is also corrosion-resistant to many molten metals and gases. In addition, it has a very low dielectric constant and thermal expansion coefficient close to that of silicon.

aluminum nitride cte (AlN) is an aluminum nitride based material that has recently received significant interest due to its superior performance as a buffer layer […]

How to Measure Cr53 in Meteorites

The cr53 method uses a multi-step anion chemistry to reduce Fe contamination. This method produces procedural blanks of less than 50 ppm of 54Cr compared to the hundreds of ppm correction needed by standard TIMS analyses. The resulting high precision in 54Cr measurement makes this method better suited to the analysis of small samples, such as those found in meteorites, where variations in bulk composition due to contaminant concentrations are larger than in individual fragments or chondrules.

Unlike traditional TIMS measurements, the multi-step approach allows for a simultaneous measurement of m53Cr and m54Cr with a high level of reproducibility. Repeated measurements of the peak performance standards indicate external reproducibility of 2.5 and 5.8 respectively, a two-fold improvement in performance compared to previous methods.

The stable isotope signature of chromium (d53/52Cr) in groundwater is thought to provide information on the oxygenation history of water. For example, d53/52Cr in leached laterite from Kastoria is positively fractionated, consistent with oxygenation of water during formation in anoxic conditions (Economou-Eliopoulos et al., 2016), whereas d53/52Cr in shallow aquifers contaminated by metal mining and other industrial activities is negatively fractionated (Novak et al., 2014).

The cr53 method uses a multi-step anion chemistry to reduce Fe contamination. This method produces procedural blanks of less than 50 ppm of 54Cr compared […]

The aluminum powder has lightweight, high buoyancy, strong hiding power

What is aluminium powder? Aluminum powder (also known as silver powder) is a silver metallic color. It is produced by adding powder to aluminum foil and crushing it into a scaly powder. Aluminum powder is light, buoyant, concealing, heat-reflective, and strong. After treatment it can become non-floating Aluminum Powder. Aluminum powder can identify fingerprints, and it can also be used in fireworks. Aluminum powder is a type of metallic pigments because of its variety of uses, popularity, and high demand.

What is the purpose of aluminum powder?
The particles of aluminum powder used in the pigments are scaly. The scaly particles are what give the aluminum powder its metallic colour and shielding effect. Metal aluminum powder is produced industrially since a very long time. Ramming was the early production method. The aluminum crumbs was placed in the grooves of punching machine. The machine drove a ramming hammer to continuously punch the aluminum in the groove. The ductile metal gradually shatters and becomes flakes. The aluminum is then screened to remove the powdered aluminum that meets the required specifications. The ramming technique has a low production efficiency, the product is hard to control, and it produces a lot dust, which can easily catch fire or explode.
German Hamtag began producing aluminum powder using a mill in 1894. Steel balls, scrap aluminum and lubricants went into the ballmill, where the scrap aluminum was crushed by the steel balls. This resulted in scaly aluminium powder that filled the ballmill and pipeline with inertness. The method of “dry production” is still being used for gas. J. Hall in the United States developed the method of adding petroleum solvents to the ballmill to replace the inert air. The produced aluminum powder is then mixed with this solvent to create a thick slurry that can be used to make slurry aluminum paint. This method has been widely adopted because it is safe and easy to use. The “wet method” is the method used by most modern aluminum powders. Aluminum powder is also used to make fireworks and explosives. Certain types of electronic devices are also made from it. A lot of paints and sealing agents contain aluminum powder.

Is Aluminum Powder Dangerous?
Exposure to fine particles can cause lung scarring (pulmonary fibrosis) and be accompanied with coughing, shortness in breath. Aluminum powder can be a fire-hazard because it is a flammable, solid.
Powder coatings have a lower risk of fire than regular paints. Comparing powder/air to solvent/air, the ignition energy is 50-100 fold higher. All flammable powders or dusts will, however, form an explosive mix with air. This can be a dangerous situation. Transport, storage, and processing are all safe if the appropriate measures are taken beforehand. To ensure safety, the powder concentration for the above-mentioned powders must not exceed 10g/m3. In the spray zone, this concentration often exceeds 10g/m3. There is always enough oxygen in the air, so it is essential to avoid sparks with more energy.

Comparing resin powders without pigments, when aluminum powder of 5-6% is added, both the “powder constant” (Dust Constant) and the maximum explosion pressure will increase by 10%. As the amount of aluminum powder increases, so will the explosive power. Aluminum powder with a content greater than 25 percent will have the same explosive power as pure metal powder. This dependency on aluminum powder pigments is not responsible for the lowest initiation energy. Pure resin powder will not reach the initiation energies, no matter what dispersion technique is used. Aluminum powder with a pigment content >10%, fine particles and uncoated aluminium powder can reduce the ignition energy.

Powder coatings with aluminum powder are identical to pigmented coatings. Fire or explosion is not a problem as long they don’t exceed the specified limit.
Aluminum powder must not be separated, accumulated or concentrated in the factory to ensure safety. These requirements are also applicable to solvent-based paints containing gold and copper powder. The explosion risk directly caused by the copper-zinc powder alloy is lower than that of aluminum.

Aluminium powder characteristics
The aluminum powder suitable for pigments refers to aluminum powder with scales. Its surface is treated and coated. Aluminum powder paste consists of pigment aluminum and solvent. Its characteristics and use are similar to those of aluminum powder. The output and dosage is larger because it’s easy to use. Comparing to other pigments, the aluminum powder for paints has more features in these aspects:
1. Scaly coverings have certain characteristics.
The particles of aluminum powder are scaly and have a diameter-to-thickness ratio of about (40 to 1) – 100:1. Aluminum powder dispersed on the carrier has the characteristic to be parallel with the substrate. Many aluminum powders have been connected. The particles are filled together to form a continuous metallic film that covers the surface and reflects light from outside. The uniqueness of aluminum powder lies in its ability to hide. Aluminum powder has a unique hiding power that is based on its surface area. This is the ratio of thickness to diameter. Aluminum is stretched during the grinding process, the diameter-to-thickness ratio continues to increase, and the hiding power also increases.
2. Shielding properties of aluminum powder
The aluminum dispersed in carrier film floats and, as a result, it always forms a parallel layer of aluminum powder on the substrate. These layers are arranged in multiple parallel layers within the carrier. The spacing between the layers of aluminum powder prevents the carrier film’s capillary pores from being used. This means that external moisture or gas can not pass through to the substrate. This is due to the physical shielding properties of aluminum powder.
3. Aluminium powder with optical properties
The aluminum powder has a metallic luster and a light colour. Its smooth surface can reflect between 60%-90% the visible light, UV light, and infrared. The surface of the object is silvery, bright and coated with paint that contains aluminum powder. Aluminum powder is known for its ability to reflect light.
4. Aluminum powder can produce a two-color effect
Aluminum powder exhibits a metallic luster, and is parallel to the coated item. The gloss and color depth change depending on the angle of incident light and the viewing angle. This is called “the two-color effect”. The aluminum powder in the coating is arranged differently in the film. When light strikes each layer of aluminum flake, the film thickness is affected by the light differently. Also, the brightness of the reflected light varies. As light enters a film that contains transparent pigments, it passes through the particles of pigment to become colored and is then reflected by various levels of aluminum. This results in changes of color tone and metal light. This property of aluminum powder is used widely in coatings such as hammer-paint or metallic paint.
5. Aluminium powder that floats
Floating type aluminum powder or aluminum paste is large and is used for pigments. This type is distinguished by its scaly appearance on the surface.

This 3D printed electric motorcycle is fully functional and made with aluminum powder
Airbus has entered the 3D motorcycle market. Light Rider is a 3D printed electric bicycle that is also the future for electric cars.
This 3D bike was launched by APWorks, a subsidiary of Airbus, and was described by them as “corrosion-resistant, combined with lightweight aluminum and almost specific strength titanium.” Scalmalloy – a special alloy for APWorks – is responsible for these qualities. Aluminum powder developed by researchers.
How do you print something so strong as a bicycle using powder? Airbus has explained that Light Rider is made of thousands thin layers with a thickness of 60 microns. Hollow frame adds to the appeal of this 3D printed electric bike. Comparing to other bicycles the frame weight has been reduced by 30%. Joachim Zettler – CEO Airbus APWorks GmbH – explained that this bicycle cannot be made using traditional milling or welding techniques. The team decided on a hollow, branched structure. So, now each Light Rider 3D printed weighs less than 35kg.
Light Rider may seem like a toy but it is incredibly practical. The top speed of the Light Rider is 49m/h, despite not being Harley. The company’s aim is to use 3D Printed electric bicycles mostly for urban driving. Airbus claims the battery of its electric vehicle can travel 37 miles after each charge.

(aka. Technology Co. Ltd., a global chemical material manufacturer and supplier with more than 12 years of experience in providing high-quality Nanomaterials and chemicals. Currently, we have developed a number of materials. Aluminum powder produced by us is high-purity, has fine particles and contains low impurities. Send us an e-mail or click the desired products to Sending an inquiry .

What is aluminium powder? Aluminum powder (also known as silver powder) is a silver metallic color. It is produced by adding powder to aluminum foil […]

An Important Structural Ceramic Material Silicon Nitride Powder

Silicon nitride Powder Inorganic substance Si3N4 has the chemical formula. This is an important ceramic structural material, with high hardness.

Silicon Nitride Properties:

Powdered silicon nitride can be gray, off-white or white. It is a compound with a melting point of zero and possesses remarkably high resistance to creeping at high temperatures. The load softening of reactive sintered Silicon Nitride without a Binder is above 1850degC.
It has two hexagonal crystal structures, a andb. Its decomposition is 1850degC when exposed to 110MPa of nitrogen and 1800degC with air. The powder is characterized by a low thermal coefficient and a high thermal conductivity.

Other than hydrofluoric acid or hot phosphoric, silicon nitride has a high corrosion resistance.

Silicon Nitride Application:

Due to its excellent properties, silicon nitride is often used in the manufacture of bearings. Other mechanical components, such as turbine blades or mechanical seal rings are also made from this material. The heating surfaces of engine parts can be made from silicon nitride materials, which resist high temperatures and are difficult to transfer heat.

The material silicon nitride, which is a high grade refractory, is widely used. SI3N4 refractory material is used for blast furnace body, and other parts with sic. It is also used with BN in SI3N4 BN material to create horizontal continuous casting separator rings. SI3N4 BN horizontal continuous cast separation ring has a fine-structured ceramic material, with a uniform structure and high strength.

Silicon nitride can be used as a ceramic material for high temperature engineering components, advanced materials in the metalurgical industry, sealing and anti-corrosion materials in chemical industry, cutting and tooling in machining industries, etc.

The silicon nitride used for ultra-high temperature gas engines, aircraft, electric furnaces and other high-temperature applications can also be found in silicon nitride.

Tech Co., Ltd. is a professional The powder is silicon nitride With over 12 year experience in chemical product research and development. We accept payment by Credit Card, T/T (West Union), Paypal, West Union or T/T. The goods will be shipped to overseas customers via FedEx or DHL.

You can contact us for high-quality Silicon Nitride Powder. Contact us Send an inquiry.

Silicon nitride Powder Inorganic substance Si3N4 has the chemical formula. This is an important ceramic structural material, with high hardness. Silicon Nitride Properties: Powdered silicon […]

Y2O3 MSDS

Yttrium oxide (y2o3 or yttria) is an air-stable white solid. It is the most important starting material in materials science and is used for making yttrium compounds, such as yttrium iron garnets that are effective microwave filters. Yttrium oxide is also an essential raw material for many inorganic chemical applications. Yttrium oxide doped with europium gives Y2O3:Eu, which is an excellent luminescent material that emits red-orange light when excited by electrons (cathodoluminescence).

In industrial hygienist circles it is well known that MSDSs often provide inaccurate, incomplete or even misleading information. They are notorious for not clearly identifying the ingredients in a product and for providing information which is inappropriate for use by industrial hygienists or treating physicians.

The most important function that an MSDS provides is to identify the hazardous constituents of a product. There is little value in an employee showing up at a hospital emergency room with an occupational illness and telling the physician that they accidentally swallowed “Jone’s Wonder Miracle Kleaner and Gardener’s Helper.” An MSDS should provide clear uncomplicated information in terms appropriate for the lowest literate member of our society while simultaneously providing useful technical data to industrial hygienists and treating physicians.

Yttrium oxide (y2o3 or yttria) is an air-stable white solid. It is the most important starting material in materials science and is used for making […]

Sodium stearate essential for cleaning products

Introduction to sodium Stearate Sodium Octadecanoic is commonly referred to as sodium stearate. The chemical formula of sodium octadecanoic (C17H35COONa) is C17H35COONa. This organic substance has a white oily texture and a slight smell. It is created by the interaction between octadecanoic acids and sodium hydroxide. It’s used to make toothpaste, as well as a plastic stabiliser and waterproofing agent. Sodium Myristate also comes in an ultra-fine, white powder that has excellent lubricating properties, and is dispersing as well.

Is sodium Stearate harmful to skin?
Although sodium stearate does contain synthetic ingredients, it is not made from petroleum and has not been subjected to repeated production processes. It can be made using natural oils in a simple way. Natural fats, whether from plants or animals, contain a high amount of stearic. This means that they only need to be heated to a specific temperature in order to separate out the stearic component. Stearic acid is the same as stearic combined with sodium. The sodium fatty acid, which is also a harmless and non-toxic ingredient, can also be used safely in various everyday chemical products. The main component of soap, sodium stearate is safe for the skin. It is a very important surfactant, which can dissolve in water and bind to oil on the surface.
Many experiments and years of experience have proven its safety. It is important to know that because this ingredient has an improved degreasing action, people with dry or sensitive skin may experience an increase in dryness.
What is sodium stearate used for?
Sodium stearate, a material widely used, can be used to emulsify, disperse, gel, stabilize, adhere, and regulate viscosity. It is a main ingredient in soaps, cosmetics, and food additives.
Use sodium stearate to make anticorrosive coating
A paint that is anticorrosive and contains a modifier based on sodium stearate/methoxy-fatty amide. The paint consists primarily of zinc powder, inorganic silicate sodium, silicone emulsion and sodium stearate.
Zinc powder can be improved by adding sodium stearate. This will increase the thixotropic network structure and reduce the sedimentation. Add sodium methyl fatty acid amidobenzenesulfonate (SMS) to improve solubilization. The prepared paint is stable and has a good application value.
Hydrotalcite may be modified by using sodium stearate
Modification of magnesium-aluminum-carbonate hydrotalcite (MgAlCO3LDHs) using sodium stearate. The modification process was examined in relation to the thermal stability and durability of polyvinylchloride. Characterization of hydrotalcite using XRD (X-ray Diffractometer), Fourier Infrared Spectroscopy FTIR, Scanning Electron Microscope SEM was performed.
The results showed that sodium-stearate was not able to change the structure of the hydrotalcite layer, but it was able to modify the surface. This improved the thermal stability, as well as the effect on PVC. The initial coloration does not have much effect but it can increase the thermal stability of PVC and the static thermal ageing time by 57.1%.
Is sodium stearate natural?
It is not natural but it is a stearic-derived component. Stearic acid, which is a saturated fatty acids, can be produced from raw materials, such as rapeseed or palm oil. It can be made of.
Where can sodium stearate be found?
This white solid is commonly known as soap. This soapy white solid is most commonly used. This substance is found in many solid deodorants and rubbers as well as in latex paints and inks. It is also used in food additives and flavoring agents.
(aka. Technology Co. Ltd., a trusted global chemical supplier & manufacturer has been providing high-quality Nanomaterials and chemicals for over 12 year. Our company is currently developing a range of powder materials. Our OEM service is also available. You will find what you need. Sodium myristate Powder Please contact us. You can also click on any of the products you are interested in to send an inquiry.

Introduction to sodium Stearate Sodium Octadecanoic is commonly referred to as sodium stearate. The chemical formula of sodium octadecanoic (C17H35COONa) is C17H35COONa. This organic substance […]

Trimethyl Borate For Sale

trimethyl borate for sale is a versatile organic compound used as a solvent, plasticizer and catalyst. It is also a good flame retardant additive for paints and other materials, as well as an anti-oxidizing agent. It reacts with Grignard reagents to prepare boronic acids and is a precursor of borate esters, which find application in Suzuki coupling reaction. It is miscible with tetrahydrofuran, ether, isoporpylamine and hexane. It decomposes slowly in the presence of moisture and quickly in water.

American Elements offers a broad range of products for hydrogen storage research, advanced fuel cells and battery applications. These include high purity, submicron and nanopowder forms of trimethyl borate in addition to a wide variety of boron compounds.

Since 1982 Klaus F. Meyer GmbH (KFM) based in Fussgoenheim has developed from a one-man business into a leading supplier of chemical raw materials, fine chemicals and chemical intermediates for the pharmaceutical, photographic, agricultural, paints & coatings and fragrance industries. Moreover, KFM acts as a link between customers and international manufacturers of chemical specialties providing solutions for their problems and meeting specific requirements. In this way KFM is a competent partner in research and production.

trimethyl borate for sale is a versatile organic compound used as a solvent, plasticizer and catalyst. It is also a good flame retardant additive for […]

The Properties And Application of Aluminum nitride

What is Aluminium nitride?
Aluminum nitride (AIN) is a covalent-bond compound. It has the chemical formula of AIN. AlN can stabilize up to 2200. The strength of AlN at room temperatures is very high. It decreases gradually with increasing temperature. It has a low thermal expansion and good thermal conductivity, which makes it an excellent thermal shock material. It has a high resistance to corrosion in molten iron and aluminum and is a good crucible material when melting and casting these metals. Aluminum nitride also has excellent dielectric properties. It is also a promising material for electrical components. Aluminum nitride can be applied to the surface of gallium-arsenide in order to protect it against ion implantation during annealing. Aluminum nitride also acts as a catalyst for the transformation of hexagonal boron to cubic boron. It is a slow reactant with water. The product can be synthesized by combining aluminum powder with ammonia and nitrogen at 8001000. The powder can range from white to grayish-blue. If the Al2O3 system is used at 16001750 and the product is white powder, then this method will work.

Aluminum Nitride Application:

A surface acoustic-wave detector also uses epitaxial stretching due to the piezoelectric effects of aluminum Nitride. The detector will then be mounted on the silicon wafer. The thin film can only be manufactured reliably in very few places.

Aluminium nitride is a ceramic material with a low expansion coefficient, good thermal conductivity, and high strength in high temperature. It can also be used to make heat exchangers for high-temperature structural components.

Aluminum nitride can resist the corrosion of metals, alloys, and iron, such as aluminum and iron. It can also be used to melt metals, such as Al. Cu. Ag. Pb.

Aluminum Nitride is widely used as a semiconductor electronic package due to its excellent properties in terms of electrical, mechanical and thermal properties.

Tech Co., Ltd. () is an Aluminum nitride manufacturer with over 12 year experience in the chemical products development and research. You can send an email to Contact us if you’re looking for Aluminum nitride of high quality.

What is Aluminium nitride? Aluminum nitride (AIN) is a covalent-bond compound. It has the chemical formula of AIN. AlN can stabilize up to 2200. The […]

The Properties and Application of Gallium Nitride Powder

Gallium nitride The chemical formula of GaN is used to describe an inorganic material. It is made up of gallium and nitrous oxide. Gallium Nitride is a direct-bandgap semiconductor that has been widely used in light emitting diodes (LEDs) since 1990. This compound is a wurtzite-like material with high hardness.

Gallium Nitride Properties:

Gallium Nitride is a compound with an extremely high melting temperature. The melting point is around 1700degC. GaN is ionized to a very high degree, the highest of all Group III-V substances. GaN has a hexagonal, wurtzite-like structure when under atmospheric pressure.
At room temperature gallium nitride (GaN) powder is insoluble with water, acids and alkalis, but it will dissolve very slowly in a hot solution of alkali. The use of NaOH and H2SO4 to corrode GaN crystals with low quality can detect any defects. GaN has unstable properties at high temperature under HCL and H2 gas. It is most stable when under N2 or N2 Gas.

The Application Of Gallium Nitride

Use of gallium nitride in electronic devices
GaN has a high breakdown field and low heat production rate. This material is important for high-temperature, high-power electronics and high-frequency microwave devices. With the advancement of MBE in the application and GaN materials, as well as breakthroughs in key technologies for thin film growth, a variety GaN heterostructures are successfully grown.

The powdered gallium nitride used in optoelectronic components
GaN materials are ideal for light-emitting devices with short wavelengths. GaN, and its alloys, have a band gap that covers spectral bands from red through to ultraviolet. Since Japan created a homojunction GaN Blue LED in 1991 double heterojunction ultra bright blue LEDs, and single quantum-well GaN LEDs made of InGaN have been developed. GaN UV detectors are being developed. They will be used in the early warning of missiles and for flame detection.

Tech Co., Ltd. is a professional Gallium nitride Powder Over 12 years in research and development of chemical products. You can contact us for high quality galium nitride. Contact us Send an inquiry.

Gallium nitride The chemical formula of GaN is used to describe an inorganic material. It is made up of gallium and nitrous oxide. Gallium Nitride […]

Recent articles