Potassium silicate glass and potassium silicate inorganic nano resin


What does potassium silicate mean?

Potassium silicate

Also known as potassium metasilicate. There are three kinds of it: 1K2SiO3=154.29; colorless crystal which is usually greenish or blocky. Its melting point at 976. It can be dissolved in water. Alkaline, insoluble in water and insoluble with ethanol. Acids decompose and produce silicic acids gel. It absorbs water in the atmosphere and deliquesces. 2 K2Si2O5=214.37. Colorless rhombic crystalline. The melting point is 1015 +-10 and the relative density is 2.556 (25/4). 3 K2Si4O9 *H2O=352.56, white homobic crystal. The relative density of the crystal is 2.41. The temperature at which it can be broken down to 400 is sufficient. It dissolves in water, but is insoluble when ethanol. By heating potassium hydroxide and potassium carbonate at high heat, it can be prepared. It has strong alkaline reactions and is hygroscopic. Potassium Silicate can be easily decomposed and precipitated in acidic environments. Potassium Silicate is used in the manufacture of welding electrodes. The wide variety of uses for potassium silicate are evident. Potassium silicate elements are very similar to potassium feldspar. It’s therefore important to learn how to make potassium silicate from potassium feldspar.


Produce potassium silicate glass


Step 1.

:

Combine tetraethyl orsilicate and water in a bowl and stir to make a homogeneous mixture. Mix the hydrochloric acid with KCl solution one at a time under stirring conditions. Make a mixture. Step 2 – Place the mix solution in the oven. At 200300 degrees, place the crucible into the oven. Turn the oven to 500-600 degrees. The oven should be closed after a constant temperature process for approximately 23 hours. It is safe to take out the pan after the half-finished potassium silicate product has been brought up to room temperature. It is now possible to make potassium silicate glasses. The glass has very high purity and uniformity. It is easy to prepare and requires minimal production equipment.


High modulus potassium silicate organic nano resin preparation


Mixing raw materials with high-modulus potassium slicate inorganic inorganic nano resin is the final step in the preparation procedure. To mix raw materials, add low modulus potassium slicate aqueous solution, stirring to make an eddy, then add water and silica sol. Finally, add stabilizer, stabilizer, and coupling agents to turn the mixture into a uniformly mixed product. Prefabricated potassium silicate organic nano resin can be prepared by heating the mixture at 4080°C. Next, heat the mixture to 4080 degrees. After that, circulate the heated prefabricated mix in the reaction system consisting of a mixer, pump and high gravity rotating packed. This will produce potassium silicate nano resin having a modulus of 5.36.2 and solid content 26%30%. It has a particle size 520 nm, yield of 99.5%99%, and a high modularity of 5.36.2. This not only increases product quality and stability, but it also reduces reaction time and lowers energy consumption.


The price of potassium silicate


Price will depend on how large and pure the potassium silicate is. The purchase volume may also have an effect on its cost. Large quantities of small amounts will result in a lower price. On our official website, you can see the price for potassium silicate.


Potassium silicate supplier



The Advanc3dmaterials Advanced Material Nano Technology Co. Ltd.

Luoyang City (Henan Province), China. This is a trusted and reliable global supplier of chemical material. This company is a trusted supplier and manufacturer of high quality chemical materials and nanotechnology products with more than 12 year experience, such as potassium silicate. We are happy to provide high quality and economical potassium silicate.

Get in touch

Ask any question.

Inquiry us