What is zinc Stearate Emulsion (ZnSe)? It is a substance that has the chemical formula C36H70O4Zn. It is a powder that is not soluble in […]
Continue readingWhat is zinc stearate emulsion and its application
What is zinc Stearate Emulsion (ZnSe)?
It is a substance that has the chemical formula C36H70O4Zn. It is a powder that is not soluble in water. It is used primarily as a release agent and lubricant for styrene and phenolic resins, and ammonia resin. In addition, it is also used as a rubber softener and vulcanization initiator.
The aqueous emulsion zinc stearate has been called zinc Stearate Emulsion . It can be used in a number of ways, such as a release agent or color retention agent.
Z Inc stearate Characteristics
It is insoluble in water and soluble only in organic solvents that are hot, such as benzene toluene turpentine etc. ; when exposed to acid it breaks down into stearic and other salts; this is a fire hazard in dry conditions.
Z Inc stearate Preparation
The water method or the melting method is the two main methods for producing zinc stearate.
In general, zinc-stearate that is produced using the water method has an acidic pH, while the alkaline version is made with the melting method. The water method can also be called the wet technique. The water is used as a medium. A catalyst is then added to control temperature and pressure. The metal ions will be replaced by the catalyst through the catalyst and then by the actual catalyst into stearin. Acid is added to the solution in order to generate metal salts. The catalyst goes through post-processing, and it is recycled. The stearate must be centrifuged, then dried and ground until it reaches a mesh size of 200-600. This product meets industry standards. In water production, stearic is usually present in excess. This makes the product look acidic.
The dry method of melting is also known as the indirect method of zinc oxide. This means that metal oxides (indirect method) are directly added to molten stearic acids (under the condition of presence of catalyst, or else the conversion rate would be very slow and long). Dry method products can be fully reacted because of the presence and general results of a catalyst. Also, metal oxides in the product are slightly over-excessive, so it is alkaline.
Use of Zinc Stearate Emulsion
Zinc Stearate can also be used as an accelerator, thickener or lubricant. As an example, zinc stearate can be used in general as a heat stabiliser for PVC. Useful in transparent products for industrial use; when combined with a soap containing calcium, it can be used as a non-toxic product. Generally, this product has been used in soft products. However, in recent years hard, transparent products like mineral water bottles and water pipes have also been used. This product can be used because it has a good lubricity. It is a product that can improve the look of fouling and also act as a lubricant.
Zinc stearate is widely used in rubber, plastics coatings paints thermal paper cosmetics and other industries.
Rubber Industry: release agents, release agents, active Agent, etc.
Plastic Industry: Internal release agent
Coating industry: color retention agent, filler, etc.
Paint industry: grinding aids
Cosmetics industry: Lubricants
(aka. Technology Co. Ltd., a trusted global chemical supplier & manufacturer has over 12 years experience in providing high-quality nanomaterials. The Zinc Stearate Emulsion manufactured by our company is high in purity, has fine particles and contains low impurities. Please. Contact us if necessary.
The aqueous emulsion zinc stearate has been called zinc Stearate Emulsion . It can be used in a number of ways, such as a release agent or color retention agent.
Z Inc stearate Characteristics
It is insoluble in water and soluble only in organic solvents that are hot, such as benzene toluene turpentine etc. ; when exposed to acid it breaks down into stearic and other salts; this is a fire hazard in dry conditions.
Z Inc stearate Preparation
The water method or the melting method is the two main methods for producing zinc stearate.
In general, zinc-stearate that is produced using the water method has an acidic pH, while the alkaline version is made with the melting method. The water method can also be called the wet technique. The water is used as a medium. A catalyst is then added to control temperature and pressure. The metal ions will be replaced by the catalyst through the catalyst and then by the actual catalyst into stearin. Acid is added to the solution in order to generate metal salts. The catalyst goes through post-processing, and it is recycled. The stearate must be centrifuged, then dried and ground until it reaches a mesh size of 200-600. This product meets industry standards. In water production, stearic is usually present in excess. This makes the product look acidic.
The dry method of melting is also known as the indirect method of zinc oxide. This means that metal oxides (indirect method) are directly added to molten stearic acids (under the condition of presence of catalyst, or else the conversion rate would be very slow and long). Dry method products can be fully reacted because of the presence and general results of a catalyst. Also, metal oxides in the product are slightly over-excessive, so it is alkaline.
Use of Zinc Stearate Emulsion
Zinc Stearate can also be used as an accelerator, thickener or lubricant. As an example, zinc stearate can be used in general as a heat stabiliser for PVC. Useful in transparent products for industrial use; when combined with a soap containing calcium, it can be used as a non-toxic product. Generally, this product has been used in soft products. However, in recent years hard, transparent products like mineral water bottles and water pipes have also been used. This product can be used because it has a good lubricity. It is a product that can improve the look of fouling and also act as a lubricant.
Zinc stearate is widely used in rubber, plastics coatings paints thermal paper cosmetics and other industries.
Rubber Industry: release agents, release agents, active Agent, etc.
Plastic Industry: Internal release agent
Coating industry: color retention agent, filler, etc.
Paint industry: grinding aids
Cosmetics industry: Lubricants
(aka. Technology Co. Ltd., a trusted global chemical supplier & manufacturer has over 12 years experience in providing high-quality nanomaterials. The Zinc Stearate Emulsion manufactured by our company is high in purity, has fine particles and contains low impurities. Please. Contact us if necessary.
