Tag: molecular

Acetylferrocene Molecular Weight

A plethora of small bottles, jars and vials are the order of the day. We also sell a slew of standard and large bottles. For the uninitiated, this is a great time to chat with one of our knowledgeable sales reps about your next project or just drop us a line with your questions about our wares. You can even score a free quote from your local acetylferrocene meisters. The acetyl ferrocyanide is a cinch to work with, but be sure to make an appointment before heading out the door. Count on us to be your go-to source for all of your acetylferrocene needs and more.

A plethora of small bottles, jars and vials are the order of the day. We also sell a slew of standard and large bottles. For […]

Molecular Dynamics Simulations of Gold and Copper Alloy

gold and copper alloy is a mixture of gold and copper that can be found in jewelry, electronics, and many other applications. These alloys are typically characterized by a higher hardness and greater ductility for casting than pure gold. These alloys are also very resistant to corrosion, making them ideal for certain applications.

Depending on the application, the use of various metal additives can be used to enhance the properties of the base metal. These additives include copper, zinc, and silver.

The addition of these elements can improve the tensile strength of the alloy, while the low melting point of the zinc allows for better casting properties. Zinc can also reduce the porosity of the alloy, which can lead to a more desirable surface appearance.

This can be particularly helpful for white and yellow gold karats where the color of the gold is crucial to its aesthetic appeal. However, the use of these additives should be carefully weighed against their corrosive potential when compared to pure copper.

Molecular Dynamics Simulations of Au-Cu Nanoalloys: Size and Shape Effects

For several polyhedral morphologies, a regular solution is observed at the bulk scale (Figure 3). The solution degenerates into an ideal one at small sizes (4 nm) for both octahedral and decahedral morphologies, which indicates that the alloy is enriched in copper when the size decreases.

The shape-dependent size effect on the alloy is attributed to the difference in the surface energy of gold and copper at all size ranges studied. This is most apparent in the dodecahedron, truncated octahedron and icosahedron with a Cu-rich core/Au-rich surface.

gold and copper alloy is a mixture of gold and copper that can be found in jewelry, electronics, and many other applications. These alloys are […]

TRDN-3 Molecular Sieve Adsorbent For Flue Gas Denitration

About TRDN-3 Molecular Sieve Adsorbent For Flue Gas Denitration:

TRDN-3 molecular sieve is a kind of high-silicon zeolite molecular sieve with three-dimensional cross direct structure, and excellent adsorption capacity of SO2, NOx and other acidic gases.

Due to its unique pore structure and selected Si/Al ratio, TRDN-3 molecular sieve has more adsorption sites, and better thermal and hydrothermal stability, acid resistance, and has higher selectivity to SO2/NOx and other acidic gases.

Tungstenmolybdenummetals is a trusted global supplier of TRDN-3 Molecular Sieve Adsorbent For Flue Gas Denitration. We also can supply molecular sieve 13x, zeolite molecular sieve, molecular sieve 3a, molecular sieve 4a, molecular sieve 5a, lithium molecular sieve, oxygen molecular sieve, etc. Feel free to send an inquiry to get the latest price, if you would like to buy in bulk.

Technical Parameter of TRDN-3 Molecular Sieve Adsorbent For Flue Gas Denitration:

Si/Al Ratio	25-35
BET Surface Area	≥280 m2/g
NOx Adsorption	≥0.3 mmol/g
Crush Strength	≥30N
Bulk Density	≥0.55g/ml

Properties of TRDN-3 Molecular Sieve Adsorbent For Flue Gas Denitration:

High adsorption capacity, a large adsorption capacity for SO2, NOx and other acidic gas;

High acid resistance, to work stably under acidic gas conditions, has a long service life;

Excellent hydrophobic performance, high hydrothermal stability.

Applications of TRDN-3 Molecular Sieve Adsorbent For Flue Gas Denitration:

TRDN-3 is a kind of molecular sieve for flue gas denitration, is NOx selective adsorbent. It can bring economic, environmental protection and social benefits.

Packing & Shipping of TRDN-3 Molecular Sieve Adsorbent For Flue Gas Denitration:

55 gallon / sealed steel drum;
Tungstenmolybdenummetals can customize different packaging according to customer requirements.

新包装.jpg
Waste Treatment & Disposal:

After adsorption saturation, TRDN-3 molecular sieve can desorb and regenerate through variable temperature adsorption.

TRDN-3 Molecular Sieve Adsorbent For Flue Gas Denitration Properties
Other Names	N/A
CAS No.	N/A
Compound Formula	N/A
Molecular Weight	N/A
Appearance	NA
Melting Point	N/A
Boiling Point	N/A
Density	N/A
Solubility in H2O	N/A
Exact Mass	N/A
TRDN-3 Molecular Sieve Adsorbent For Flue Gas Denitration Health & Safety Information
Signal Word	N/A
Hazard Statements	N/A
Hazard Codes	N/A
Risk Codes	N/A
Safety Statements	N/A
Transport Information	N/A

Inquiry us

About TRDN-3 Molecular Sieve Adsorbent For Flue Gas Denitration:TRDN-3 molecular sieve is a kind of high-silicon zeolite molecular sieve with three-dimensional cross direct structure, and […]

4A Molecular Sieve Powder

About 4A Molecular Sieve Powder:

4A molecular sieve powder is NaA molecular sieve powder, the hydrate of crystalline silicon aluminate metal salt. 4A molecular sieve powder has the characteristics of stable quality, moderate particle size, high crystallinity, made of formed products with stable quality, large adsorption capacity.

Tungstenmolybdenummetals is a trusted global supplier of 4A Molecular Sieve Powder. Feel free to send an inquiry to get the latest price, if you would like to buy in bulk.

Technical Parameter of 4A Molecular Sieve Powder:

Item Type	Unit	4A-5 Powder	4A Powder	4A-D Powder	nm-A
Static H2O Adsorption	%	≥ 27	≥ 27	≥ 26.5	≥ 26.5
Package Moisture	%	≤ 21	≤ 21	≤ 21	≤ 21
pH-value		≤ 11	≤ 11	≤ 11	≤ 11
Bulk Density	g/ml	0.62-0.68	0.70-0.75	0.77-0.83	≤ 0.65
Screen Residual	%	≤ 0.5	≤ 0.5	≤ 0.5	≤ 0.5
D50	um	1-3	3-5	7.5-9.5	< 1 (SEM)
700℃ Static H2O Adsorption	%	≥ 27	≥ 27	≥ 26.5

Applications of 4A Molecular Sieve Powder:

4A molecular sieve powder by adding binder forming processing, widely used in air, natural gas, solvent, alkane and refrigerant drying fields; Also can be used in paint, fuel, paint dehydrating agent, high-tech molecular components manufacturing environment air treatment agent, argon production and purification. The selective adsorption performance of 4A molecular sieve on water is higher than any other molecules, is one of the largest industrial molecular sieve varieties.

新包装.jpg

4A Molecular Sieve Powder Properties
Other Names	N/A
CAS No.	N/A
Compound Formula	N/A
Molecular Weight	N/A
Appearance	NA
Melting Point	N/A
Boiling Point	N/A
Density	N/A
Solubility in H2O	N/A
Exact Mass	N/A
4A Molecular Sieve Powder Health & Safety Information
Signal Word	N/A
Hazard Statements	N/A
Hazard Codes	N/A
Risk Codes	N/A
Safety Statements	N/A
Transport Information	N/A

Inquiry us

About 4A Molecular Sieve Powder:4A molecular sieve powder is NaA molecular sieve powder, the hydrate of crystalline silicon aluminate metal salt. 4A molecular sieve powder […]

TRED Series Molecular Sieve

About TRED Series Molecular Sieve :

TRED Series Molecular Sieve is special molecular sieve for ethanol dehydration. It is a type of 3A molecular sieve, used in ethanol dehydration and drying, with high water absorption capacity.

Tungstenmolybdenummetals is a trusted global supplier of TRED Series Molecular Sieve . Our company can supply zeolite molecular sieve, molecular sieve 3a, molecular sieve 13x, molecular sieve 4a, molecular sieve 5a, lithium molecular sieve, oxygen molecular sieve, etc. Feel free to send an inquiry to get the latest price, if you would like to buy in bulk.

Technical Parameter of TRED Series Molecular Sieve :

Parameter	Unit	TRED-1	TRED-2	Note
Diameter	mm	3-5	1.6-2.5	–
Static H₂O Adsorption	%	≥21	≥21	23℃, 50% relative humidity
Static C₂O Adsorption	%	≤1.0	≤1.0	25℃, 250mmHg
Package Moisture	%	≤1.5	≤1.5	950℃, 1h
Crush Strength	N	≥100	≥35	Average 25 beads
RSD of Crush Strength	–	≤0.3	≤0.3	–
Bulk Density	g/ml	≥0.75	≥0.75	Tapped
Loss on Attrition	%	≤0.20	≤0.20	–
Particle Ratio	%	≥98	≥97	–

Properties of TRED Series Molecular Sieve:

High density, ensuring higher adsorption capacity per unit length bed;

High adsorption rate, making full use of molecular sieve adsorption capacity;

High strength, high compressive strength,

Low wear, reducing the degree of molecular sieve pulverization in the process of use;

Good fluidity, the size range of the ball is strictly controlled to ensure the uniformity of the bed;

High performance.

新包装.jpg

TRED Series Molecular Sieve Properties
Other Names	N/A
CAS No.	N/A
Compound Formula	N/A
Molecular Weight	N/A
Appearance	NA
Melting Point	N/A
Boiling Point	N/A
Density	N/A
Solubility in H2O	N/A
Exact Mass	N/A
TRED Series Molecular Sieve Health & Safety Information
Signal Word	N/A
Hazard Statements	N/A
Hazard Codes	N/A
Risk Codes	N/A
Safety Statements	N/A
Transport Information	N/A

Inquiry us

About TRED Series Molecular Sieve :TRED Series Molecular Sieve is special molecular sieve for ethanol dehydration. It is a type of 3A molecular sieve, used in […]

TROX-500 High Efficiency Oxygen Molecular Sieve

About TROX-500 High Efficiency Oxygen Molecular Sieve:

TROX-500 series high efficiency oxygen molecular sieve is a new TYPE X molecular sieve, mainly used in pressure adsorption atmospheric pressure analysis of pressure swing adsorption oxygen production process. It has a higher nitrogen adsorption capacity and excellent nitrogen and oxygen separation coefficient.

Tungstenmolybdenummetals is a trusted global supplier of TROX-500 High Efficiency Oxygen Molecular Sieve. Our company can supply zeolite molecular sieve, molecular sieve 3a, molecular sieve 13x, molecular sieve 4a, molecular sieve 5a, lithium molecular sieve, oxygen molecular sieve. Feel free to send an inquiry to get the latest price, if you would like to buy in bulk.

Technical Parameter of TROX-500 High Efficiency Oxygen Molecular Sieve:

Item Type	Unit	Spherical		Note
Item Type	Unit	TROX-500	TROX-501A	Note
Diameter	mm	1.6-2.5	0.4-0.8	–
Static H2O Adsorption	%wt	≥29.5	≥30	RH75%, 25℃
Static C2O Adsorption	%wt	≥19.8	–	25℃, 250mmHg
Static N2 Adsorption	ml/g	≥8	≥8	25℃, 760mmHg
N2/O2 Selectivity	–	≥3	≥3	1bar, 25℃
Bulk Density	g/ml	0.62-0.66	0.62-0.66	Tapped
Crush Strength	N	25±3	–	Average 25 beads
Loss on Attrition	%wt	≤0.3	≤0.3	–
Particle Ratio	%	≥97	≥95	–
Package Moisture	%wt	≤1.0	≤1.0	575℃, 1hr

Applications of TROX-500 High Efficiency Oxygen Molecular Sieve:

TROX-500 series high efficiency oxygen molecular sieve is mainly used in pressure swing adsorption (PSA) oxygen production device.
It has the advantages of high purity of oxygen production, high oxygen production rate, fast adsorption rate and long service life, and is the best alternative product for 5A (CaA) oxygen molecular sieve.
TROX-500 product is mainly used in PSA industrial oxygen production and medical center oxygen supply system. TROX-501 product is special oxygen molecular sieve for PSA medical (household) oxygen generator and micro oxygen generator.

Packing & Shipping of TROX-500 High Efficiency Oxygen Molecular Sieve:

55 gallon / sealed steel drum;

10 gallon / sealed steel drum.

新包装.jpg

TROX-500 High Efficiency Oxygen Molecular Sieve Properties
Other Names	N/A
CAS No.	N/A
Compound Formula	N/A
Molecular Weight	N/A
Appearance	NA
Melting Point	N/A
Boiling Point	N/A
Density	N/A
Solubility in H2O	N/A
Exact Mass	N/A
TROX-500 High Efficiency Oxygen Molecular Sieve Health & Safety Information
Signal Word	N/A
Hazard Statements	N/A
Hazard Codes	N/A
Risk Codes	N/A
Safety Statements	N/A
Transport Information	N/A

Inquiry us

About TROX-500 High Efficiency Oxygen Molecular Sieve:TROX-500 series high efficiency oxygen molecular sieve is a new TYPE X molecular sieve, mainly used in pressure adsorption […]

NSP-1 Molecular Sieve

About NSP-1 Molecular Sieve:

NSP-1 molecular sieve is a crystalline silicon aluminate with developed three-dimensional pore structure and strong polarity.
It has strong ability to adsorb water molecules, so it is suitable for deep natural gas dehydration occasions.
It has large specific area, developed pores, large water adsorption capacity, high dehydration depth, almost no adsorption of CH4 and C2 or above raw gas in the dehydration process.

Tungstenmolybdenummetals is a trusted global supplier of NSP-1 Molecular Sieve. We provide molecular sieve 5a, molecular sieve 3a, zeolite molecular sieve, molecular sieve 13x, molecular sieve 4a, lithium molecular sieve, oxygen molecular sieve. Feel free to send an inquiry to get the latest price, if you would like to buy in bulk.

Technical Parameter of NSP-1 Molecular Sieve:

Item Type	Unit	Spherical	Bar		Note
Diameter	mm	3-5mm	1-8’’	1-16’’	–
Static H2O Adsorption	%wt	≥21.5	≥21.5	≥21.5	25℃, saturated salt solution
Crush Strength	N	≥100	≥90	≥40	Average 25 beads
Bulk Density	g/ml	≥0.75	≥0.70	≥0.70	Tapped
Loss on Attrition	%wt	≤0.10	≤0.20	≤0.20	–
Particle Ratio	%	≥98	≥98	≥98	–
Package Moisture	%wt	≤1.50	≤1.50	≤1.50	575℃, 1hr

Applications of NSP-1 Molecular Sieve:

In the production of compressed natural gas (CNG) or liquefied natural gas (LNG), NSP-1 Molecular Sieve is used for deep dehydration, to prevent the equipment or pipelines from freezing and clogging during pressurization and liquefaction.

Generally, two or three tower processes are used, and two tower processes are used for longer periods. During production, one tower is in adsorption state and another is in activation regeneration state. During adsorption, the natural gas with high water content generally passes through the molecular sieve bed from top to bottom to reduce the disturbance of gas flow to the molecular sieve bed. When switching between adsorption and regeneration, the pressure-lowering and pressure-generating rates should be less than 0.3MPa/min.

Packing & Shipping of NSP-1 Molecular Sieve:

25kg/ carton;
55 gallon / sealed steel drum;
Tungstenmolybdenummetals can customize different packaging according to customer requirements.

新包装.jpg

NSP-1 Molecular Sieve Properties
Other Names	N/A
CAS No.	N/A
Compound Formula	N/A
Molecular Weight	N/A
Appearance	NA
Melting Point	N/A
Boiling Point	N/A
Density	N/A
Solubility in H2O	N/A
Exact Mass	N/A
NSP-1 Molecular Sieve Health & Safety Information
Signal Word	N/A
Hazard Statements	N/A
Hazard Codes	N/A
Risk Codes	N/A
Safety Statements	N/A
Transport Information	N/A

Inquiry us

About NSP-1 Molecular Sieve:NSP-1 molecular sieve is a crystalline silicon aluminate with developed three-dimensional pore structure and strong polarity.It has strong ability to adsorb water molecules, so […]

NSP-3 Molecular Sieve

About NSP-3 Molecular Sieve:

NSP-3 molecular sieve is a crystalline silicon aluminate with developed three-dimensional pore structure and strong polarity.

It has a strong adsorption effect on CO2 and mercaptan molecules, so it is suitable for deep removal of CO2 and mercaptan from natural gas.

It has large specific area, developed channels, large CO2 adsorption capacity, fast CO2 removal, high CO2 removal depth, no corrosion to the equipment, long service life, long switching cycle, easy to realize automatic operation, low maintenance cost, small secondary pollution, and it can be regenerated through temperature and pressure changes.

Tungstenmolybdenummetals is a trusted global supplier of NSP-3 Molecular Sieve. We also can supply molecular sieve 3a, zeolite molecular sieve, molecular sieve 13x, molecular sieve 4a, molecular sieve 5a, lithium molecular sieve, oxygen molecular sieve. Feel free to send an inquiry to get the latest price, if you would like to buy in bulk.

Technical Parameter of NSP-3 Molecular Sieve:

Item Type	Unit	Spherical	Bar		Note
Diameter	mm	3-5mm	1-8’’	1-16’’	–
Static H2O Adsorption	%wt	≥26.5	≥26	≥26.5	25℃, saturated salt solution
Static C2O Adsorption	%wt	≥18.5	≥18	≥18	250mmHg, 25℃
Crush Strength	N	≥85	≥50	≥30	Average 25 beads
Bulk Density	g/ml	≥0.64	≥0.61	≥0.61	Tapped
Loss on Attrition	%wt	≤0.10	≤0.20	≤0.10	–
Particle Ratio	%	≥98	≥95	≥95	–
Package Moisture	%wt	≤1.50	≤1.50	≤1.50	575℃, 1hr

Applications of NSP-3 Molecular Sieve:

It is used for removal of mercaptan of natural gas and carbon dioxide of liquefied natural gas.

Natural gas is a mixture of hydrocarbon gases as the main component, long accompanied by CO2,H2S and other non-hydrocarbon gases, CO2,H2S and other acidic gases will lead to corrosion of equipment and pipelines, and the existence of CO2 will lead to low calorific value of natural gas. In addition, LNG (liquefied natural gas) raw material CNG (compressed natural gas) must be removed before liquefaction, such as carbon dioxide, hydrogen sulfide and other impurities, to avoid crystallization in the cryogenic process clogging pipelines and corrosive gas corrosion of pipelines and equipment. Carbon dioxide can easily form dry ice during liquefaction, clogging pipes. Therefore, high CO2 content in CNG must be removed before it can be prepared into LNG.

新包装.jpg Packing & Shipping of NSP-3 Molecular Sieve:

25kg/ carton;
55 gallon / sealed steel drum;
Tungstenmolybdenummetals can customize different packaging according to customer requirements.

NSP-3 Molecular Sieve Properties
Other Names	N/A
CAS No.	N/A
Compound Formula	N/A
Molecular Weight	N/A
Appearance	NA
Melting Point	N/A
Boiling Point	N/A
Density	N/A
Solubility in H2O	N/A
Exact Mass	N/A
NSP-3 Molecular Sieve Health & Safety Information
Signal Word	N/A
Hazard Statements	N/A
Hazard Codes	N/A
Risk Codes	N/A
Safety Statements	N/A
Transport Information	N/A

Inquiry us

About NSP-3 Molecular Sieve:NSP-3 molecular sieve is a crystalline silicon aluminate with developed three-dimensional pore structure and strong polarity.It has a strong adsorption effect on CO2 […]

TRDN-1 Molecular Sieve Catalyst for Denitration of Exhaust Gas of DSL Vehicles

About TRDN-1 Molecular Sieve Catalyst for Denitration of Exhaust Gas of DSL Vehicles:

TRDN-1 is a new molecular sieve used for removal of NOx of exhaust gas of DSL vehicles.
It has stable structure, excellent activity. The conversion rate of NOx is greater than 80% at 150℃. It can still maintain high activity and stability in hydrothermal treatment conditions at 700℃, 800℃. Compared with the previous dsl vehicle exhaust catalyst, it has higher catalytic efficiency, wider applicable temperature and better thermal stability. It is suitable for dsl vehicle emission catalyst carrier.

Tungstenmolybdenummetals is a trusted global supplier of TRDN-1 Molecular Sieve Catalyst for Denitration of Exhaust Gas of DSL Vehicles. Our company also can supply molecular sieve 3a, zeolite molecular sieve, molecular sieve 13x, molecular sieve 4a, molecular sieve 5a, lithium molecular sieve, oxygen molecular sieve, etc. Feel free to send an inquiry to get the latest price, if you would like to buy in bulk.

Technical Parameter of TRDN-1 Molecular Sieve Catalyst for Denitration of Exhaust Gas of DSL Vehicles:

Si/Al Ratio	6-12
BET Surface Area	≥400m2/g
NO Conversion Rate in low temperature	≥70%
NO Conversion Rate in Medium and high temperature	≥90%
N2 Selectivity	≥95%

Properties of TRDN-1 Molecular Sieve Catalyst for Denitration of Exhaust Gas of DSL Vehicles:

TRDN-1 molecular sieve has consistent quality, stability and high crystallinity, and cation exchange and adjustable acidity;

Excellent NOx catalytic reduction activity in low temperature, and high hydrothermal stability in high temperature;

High airspeed resistance, HCs toxicity resistance.

Applications of TRDN-1 Molecular Sieve Catalyst for Denitration of Exhaust Gas of DSL Vehicles:

TRDN-1 is a new developed silicon aluminum molecular sieve, which can be used as adsorbent or catalyst carrier, such as air purification agent, automobile exhaust purification catalyst, etc. It can adsorb N2, CH4, CO2 and other molecules with critical diameters less than 3.8A. It can be used as catalyst for NH3-SCR catalytic removal of NOx from dsl vehicle exhaust.

Packing & Shipping of TRDN-1 Molecular Sieve Catalyst for Denitration of Exhaust Gas of DSL Vehicles:

40g/sack
500Kg/sack
1000kg/sack

新包装.jpg

TRDN-1 Molecular Sieve Catalyst for Denitration of Exhaust Gas of DSL Vehicles Properties
Other Names	N/A
CAS No.	N/A
Compound Formula	N/A
Molecular Weight	N/A
Appearance	NA
Melting Point	N/A
Boiling Point	N/A
Density	N/A
Solubility in H2O	N/A
Exact Mass	N/A
TRDN-1 Molecular Sieve Catalyst for Denitration of Exhaust Gas of DSL Vehicles Health & Safety Information
Signal Word	N/A
Hazard Statements	N/A
Hazard Codes	N/A
Risk Codes	N/A
Safety Statements	N/A
Transport Information	N/A

Inquiry us

About TRDN-1 Molecular Sieve Catalyst for Denitration of Exhaust Gas of DSL Vehicles:TRDN-1 is a new molecular sieve used for removal of NOx of exhaust […]

Tag: molecular

Acetylferrocene Molecular Weight

Molecular Dynamics Simulations of Gold and Copper Alloy

Molecular Dynamics Simulations of Au-Cu Nanoalloys: Size and Shape Effects

TRDN-3 Molecular Sieve Adsorbent For Flue Gas Denitration

TRDN-3 Molecular Sieve Adsorbent For Flue Gas Denitration Properties

TRDN-3 Molecular Sieve Adsorbent For Flue Gas Denitration Health & Safety Information

4A Molecular Sieve Powder

4A Molecular Sieve Powder Properties

4A Molecular Sieve Powder Health & Safety Information

TRED Series Molecular Sieve

TRED Series Molecular Sieve Properties

TRED Series Molecular Sieve Health & Safety Information

TROX-500 High Efficiency Oxygen Molecular Sieve

TROX-500 High Efficiency Oxygen Molecular Sieve Properties

TROX-500 High Efficiency Oxygen Molecular Sieve Health & Safety Information

NSP-1 Molecular Sieve

NSP-1 Molecular Sieve Properties

NSP-1 Molecular Sieve Health & Safety Information

NSP-3 Molecular Sieve

NSP-3 Molecular Sieve Properties

NSP-3 Molecular Sieve Health & Safety Information

TRDN-1 Molecular Sieve Catalyst for Denitration of Exhaust Gas of DSL Vehicles

TRDN-1 Molecular Sieve Catalyst for Denitration of Exhaust Gas of DSL Vehicles Properties

TRDN-1 Molecular Sieve Catalyst for Denitration of Exhaust Gas of DSL Vehicles Health & Safety Information

Recent articles