Category: News

Newstungstenmolybdenummetals is a professional news and article media center for new materials, nano materials, chemical company, machinery, digital products, indusitrial products and more. Newstungstenmolybdenummetals has a professional editorial and researching team that provides qualified and authentic content on the internet. We also have laboratory and R&D resources for advanced Nano material / New material research and experiment. Our topics: nanoparticles, graphite powder, boron powder , zinc sulfide , nitride powder, Molybdenum disulfide,silicon powder,max phases powder, quartz powder, 3D printing metal powder, and so on.

Why silicon nitride is an important structural ceramic material

What’s silicon nitride? Silicon nitride This important structural ceramic material has high hardness and wear resistance. The atomic crystal resists high temperature oxidation. It is also resistant against cold and hot shocks. It can also be heated up to 1000°C in air. Then it is cooled quickly and heated intelligently until the material does not crack. This is because silicon nitride clays possess such great properties that they are often used to produce bearings, blades for turbines, seal rings and permanent molds. For example, silicon nitride ceramics are used for heating the surfaces of engine components. They are not easily heat transferred and are highly resistant to extreme temperatures. This can help improve middle distillate engines’ quality and also save on fuel and energy. China, Japan and the United States have all developed middle distillate engine technology.

Silicon nitride production process
The two main production methods for silicon nitride ceramics are reaction sintering (or hot pressing) sintering. According to general ceramic product production methods, the reaction sintering process produces silicon powder. Next, the furnace performs pre-nitriding at 11501200. The machine tool can then be used to machine the products after they have reached a desired strength. Then further nitriding takes place at 13501450 over 1836h, until products are silicon nitride. The product volume and size are stable because of this method. A hot pressing method involves combining silicon nitride powder and small quantities of additives like MgO or Al2O3, Al2O3, AlF2, MgF2, or Fe2O3. At a pressure of 19.6MPa or more, at a temperature between 16001700, hot pressing can result in denser products. They are more stable than products made with reaction sintering.

Primary Silicon nitride applications
Si3N4 SIC refractories are used in combination with sic for blast oven stack. Other parts include SI3N4BN materials and BN for horizontal continuous casting separator ring. This ceramic material is acceptable and has a flat structure. The requirements of continuous cast mean that it cannot be wetted using liquid steel. Silicon nitride ceramic materials are also very stable, resistant to strong oxidation, and have excellent dimensional accuracy. Silicon nitride can be formed an oxide protective coating in the air and is therefore a good covalent compound. It cannot be reduced below 1200. Protective film created at 1200-1600 will prevent any further oxidation. It is not able to be soaked in molten metals and alloys like aluminum, lead and tin and can resist corrosion. However, it is susceptible to being damaged by molten solution like magnesium, nickel-chromium allie, and stainless steel.

Prices for silicon nitride
Prices will depend on how small and pure silicon nitride particles are. The purchase volume may also have an effect on cost. Large quantities of high quality silicon nitride are more expensive. On our official website, you can see the price of silicon nitride.

Silicon nitride supplier
The Advanc3dmaterials Advanced Material Nano Technology Co. Ltd. Luoyang City is located in China’s Henan Province. (Advanc3dmaterials). This company supplies and manufactures high-quality chemical material worldwide. This company is a trusted supplier and manufacturer of high quality chemical materials and nanotechnology products with more than 12 years experience, such as silicon nitride. It also offers nitride Powder, graphite Powder, and sulfide Powder. We are happy to provide high-quality silicon nitride at a reasonable price. Get in touch Ask any question.

Inquiry us

What’s silicon nitride? Silicon nitride This important structural ceramic material has high hardness and wear resistance. The atomic crystal resists high temperature oxidation. It is […]

Tris 1 10 Phenanthroline Cobalt III

tris 1 10 phenanthroline cobalt iii is a coordination compound which can be used as a fluorescent probe for detection of metal ions, as a catalyst for organic reactions, and as an inhibitor of enzymes. It is widely studied in the fields of chemistry, biochemistry and physiology.

Synthesis, spectroscopic and X-ray structural studies of [Co(phen)3]3(V4O12)2Cl*27H2O

A complex salt derived from a simple reaction of tris(1,10-phenanthroline)cobalt(III) chloride with ammonium metavanadate in water in 1:3 molar ratio has been obtained. The complex salt, [Co(phen)3]3(V4O12)2Cl*27H2O, is sparingly soluble in water and other common solvents.

Structural features and bond lengths and angles of the asymmetric unit are reported in table 2. The cation has distorted octahedral geometry with selected Co-N distances ( 90deg) whereas the anion is slightly distorted octahedral with N-Co-N angles involving nitrogen of the same 1,10-phenanthroline having 80deg.

Spectroscopic studies and conductance measurements of the complex salt have been performed with a PERKIN ELMER spectrum RX FT-IR system. The results show that the complex salt exhibits a broad range of spectra, which is mainly dominated by UV/Visible spectroscopy and low infrared spectroscopy.

Kinetics of reduction of the complex with N-methylthiourea has been carried out under pseudo-first order conditions in aqueous acidic medium and the rate was found to be strongly dependent on the concentration of both redox species. The kinetics was also influenced by the addition of ions to the medium.

In addition, a new bioanalytical method was developed for the determination of aluminum phthalocyanine chloride in skin permeation studies using the CoPhen complex. This new method is a sensitive and selective method for the quantification of the complex in nanoemulsions and biological matrices.

tris 1 10 phenanthroline cobalt iii is a coordination compound which can be used as a fluorescent probe for detection of metal ions, as a […]

Thermoelectric Properties of Copper Sulfide

Copper sulfide is a common mineral which exhibits varying electrochemical and oxidative behaviors, depending on its crystal structure. These differences can lead to a variety of applications including hydrometallurgy, bioleaching and flotation.

The crystalline solids of copper sulfide have been found to be useful in the production of thermoelectric materials because of their mixed (e-, Cu+) conducting properties and low calcination temperatures required. These properties ease synthesis and reduce the CO2 footprint.

Unlike oxides, which require high calcination temperatures to form, copper sulfides are able to be formed from the elements at much lower temperatures, even in air at room temperature. They also exhibit a high degree of thermal stability and have a wide variety of physical properties such as ionic conductivity, chemical inertness and electrical insulation.

Chalcopyrite, the most common copper sulfide, crystallizes in a tetragonal system with each metal atom coordinated by a S atom. The tetragonal crystal system is a natural form of asymmetry which has been found in a number of other minerals including quartz and pyrite.

The tetragonal structure is associated with low lattice thermal conductivity and good thermoelectric figures of merit at a range of potentials. This results in an ideal model for transition-metal chalcogenide thermoelectric materials.

In order to further understand the effect of the tetragonal structure on diffusion, we measured the resistances Rint, Rpore and Rdep for potentials of -0.80 V/SCE on static electrodes with different tetrahedral sulfur doping (SH-) concentrations. As shown in Figure 2, the values of Rpore decreased for both the pore and deposit at higher potentials, which is consistent with the larger currents observed in the polarization curves.

Copper sulfide is a common mineral which exhibits varying electrochemical and oxidative behaviors, depending on its crystal structure. These differences can lead to a variety […]

Silicon Nitride Ceramic Preparation And Application

Silicon nitride Ceramic is an organic material ceramic that does NOT shrink when sintering. Silicon nitride is extremely strong, especially when hot-pressed. This is why it is considered one of the strongest materials on the planet. It has high strength and low density.

Silicon Nitride Ceramic Preparation

Si3N4 ceramics can be prepared using a variety of methods, including hot pressing, atmospheric, pressure, and hot press sintering.
Reaction sintering method (RS)
The following is the method of forming it. First, the silicon powder must be pressed into a desired shape. Then it will go into a nitriding furnace to undergo pre-nitriding or partial nitriding before being sintered. The pre-nitrided green bodies already have a certain strength. There are many mechanical processes that can be done to the green body, including turning, milling, and drilling. To obtain a product with minimal dimensional changes, the temperature must be above the melting points of silicon.

Hot Press Sintering
It uses Si3N4 Powder and small amounts of additives (such a MgO or Al2O3, MgF2, F2O3, etc.). It is pressed at above 1916 MPa, and heated to 1600 degrees for hot press molding or sintering. Si3N4 ceramics made by hot pressing are superior to those of Si3N4 that has been reaction sintered. They have high strength and density.

Method of atmospheric pressure sintering (PLS)
To increase the pressure of the sintering atmosphere nitrogen atmosphere, it uses the properties Si3N4 for decomposition temperature. Usually, N2 = 1atm is used, with a minimum of 1800degC. After atmospheric sintering has been completed at temperatures between 1700-1800degC and then air pressure sintering can be done at temperatures between 1800-2500degC.

Air pressure sintering technique (GPS).
At a pressure of 1-10 MPa and at temperatures of approximately 2000 degrees C, silicon nitride can be air pressure sintered. The high nitrogen pressure prevents silicon nitride from decomposing at high temperatures. It is possible to produce a high toughness ceramic by using high temperature sintering with less sintering tools.

Silicon Nitride Ceramic Application

Silicon nitride Ceramics are well-suited for many industries, including metallurgy machinery energy and machine, aerospace, chemical industry, aerospace and others.

Silicium nitride ceramics in mechanical engineering can be used to produce bearings. Cutting tools, high-temperature bolts. Drawing dies. Ball valves. Plungers. Sealing materials. Nozzles.

Hot-pressed silicon nitride ceramic tool have a 5-15x higher durability than cemented carbide and a 3-10x higher cutting speed. Dispersion strengthening can be used to increase the performance and longevity of silicon-nitride tools by compounding TiC or ZrC.

Silicon nitride clay has excellent mechanical properties. It is both wear-resistant and self-lubricating. It is an excellent bearing material with a longer service life than other ceramic ones. It is resistant to corrosion and high temperatures, and can be used in harsh environments.

Tech Co., Ltd. () is a professional nitride powder Over 12 years of chemical product development and research experience. We accept credit cards, T/T and Paypal payments. We will ship goods overseas via FedEx, DHL and by air or sea to our customers.

You can contact us for high quality silicon Nitride powder. Get in touch Send an inquiry

Silicon nitride Ceramic is an organic material ceramic that does NOT shrink when sintering. Silicon nitride is extremely strong, especially when hot-pressed. This is why […]

Strontium Hydroxide Octahydrate Formula

Strontium hydroxide octahydrate is a white powder which is produced by the reaction of water upon an oxide. It has high purity and may be available in submicron or nanopowder form.

This compound is a colorless deliquescent crystal and absorbs carbon dioxide from the air. It is soluble in hot water and acids. It melts at 375degC and is used in the sugar industry, in lubricants and soaps and as a plastic stabilizer.

It is a strong base that is widely used for producing strontium lubricating wax and all kinds of strontium salts. It is also used in oil and paint industry to improve its drying properties.

In addition, it is an active ingredient in depilatory hair removal products. It is a severe skin, eye and respiratory irritant. It can be dangerous if swallowed and is therefore not recommended for use by children or the elderly.

The OH- anion of hydrogen and oxygen is present in nature and is one of the most widely studied molecules in physical chemistry. It has diverse properties and uses, from base catalysis to detection of carbon dioxide. In a watershed 2013 experiment, scientists at JILA (the Joint Institute for Laboratory Astrophysics) achieved evaporative cooling of compounds using hydroxide molecules, a discovery that may lead to new methods of controlling chemical reactions and could impact a range of disciplines including atmospheric science and energy production technologies.

Strontium hydroxide is very slightly soluble in cold water and can be prepared by the addition of a strong base such as sodium or potassium hydroxide drop by drop to a solution of any soluble strontium salt most commonly the nitrate, Sr(NO3)2. The precipitate will then filter off, be washed with cold water and dried.

Strontium hydroxide octahydrate is a white powder which is produced by the reaction of water upon an oxide. It has high purity and may be […]

Understanding the Carbon Fiber Melting Point

When designing with carbon fiber, you’ll want to know the melting point. It’s a crucial factor in the strength of your prototype.

Unlike steel, carbon fiber does not melt or bend under high temperatures, making it an ideal material for crafting your prototypes. A carbon fiber composite’s final product can withstand up to 1,000 W/mK of heat, making it a perfect choice for a range of industrial applications.

How it’s Made

The atomic structure of carbon fiber is based on sheets of crystalline carbon atoms, arranged in a regular hexagonal pattern (like graphene). These strands of crystals are closely linked to one another, giving carbon fiber its stiffness and strength.

Manufacturing Methods

There are many ways to make carbon fiber. The most common process is to stretch precursor materials that contain high carbon content, such as polyacrylonitrile (PAN), or mesophase pitch. These precursors are heated at varying temperatures (not containing oxygen) in cycles to carbonize the strands.

These cycles can be very short, or they can take hours or even days. The end result is a series of stacked and folded strands that are bonded together in a honeycomb-like structure.

During production, the fibers are aligned and oriented according to the desired properties of the composite. The orientation of the fibers determines how stiff the product will be, but this is not always easy to achieve.

When designing with carbon fiber, you’ll want to know the melting point. It’s a crucial factor in the strength of your prototype.Unlike steel, carbon fiber […]

Anhydrous Copper Sulfate Formula

The anhydrous copper sulfate formula is a chemical compound which contains five water molecules surrounding a single cooper sulfate molecule. It has an oxidizing ability and is used as a dehydrating agent in acetal groups. This crystalline substance is available in several different forms and is often used in undergraduate chemistry experiments.

It is also an important ingredient in Fehling’s and Benedict’s solutions. It is also used in the Biuret reagent to test for proteins. Copper ions are also used as an antimicrobial agent, especially in the septic system.

As a fungicide, copper sulfate is useful in preventing the growth of fungi. In addition, it is commonly used as a herbicide in pools. However, it can cause serious health problems, such as itching eczema and ulceration of the cornea.

Anhydrous copper sulfate is a blue-white crystalline solid that is widely used in a number of applications. It is used in the production of glassware, pottery, and as an additive in concrete. A number of teenager chemistry sets contain copper sulfate.

Another use is as a chemical mordant in vegetable dyeing. It is also used in metal etching for jewelry.

Copper sulfate is also used as an electrolyte in batteries. It is also used as a herbicide and in molluscicides. For these purposes, it is important to make sure that the sulfate is pure. When producing copper sulfate, it is a good idea to use a heat-resistant mat that will allow rapid cooling. Overheating may result in the release of toxic fumes.

Inquiry us

The anhydrous copper sulfate formula is a chemical compound which contains five water molecules surrounding a single cooper sulfate molecule. It has an oxidizing ability […]

What is Cementite?

Or iron caride is an iron-carbon compound, or, more precisely, an intermediate transitional metal carbide having the molecular formula F3C. It weighs 6.67% and 93.3% respectively. It is a gray-white crystal powder with a relative density of 7.694. It is insoluble when dissolved in cold, hot, and dilute acid. But, it is soluble in hot concentrated hydrogen chloric acid to make mixtures with hydrogen, methane and other complex hydrocarbons. Do not react with dry oxygen. Iron oxide and carbon can be formed by oxidizing in moist air. It has an orthorhombic structure. It is a soft and fragile material and, in its natural form, is classified as ceramic. This is why it is an integral part of black metalurgisty.

What does Fe3C mean?
Fe3C, also known as iron carbide, is also known cementite.

How do you make cementite?
Primary cementite
When the liquid alloy of iron-carbon alloy (hypereutectic yellow cast iron), is cooled below the liquidus, the cementite precipitates.

Eutectic cemented cementite:
In the ledeburite structure, the point-strip cementite is evenly distributed on the austenite matrix.

Preeutectoid phase, cementite:
Alloys with hypoeutectoid/hypereutectoid composition are always precipitated with a decrease in temperature. This is the proeutectoid Phase. Because of the differences in forming conditions, proeutectoid morphology can be divided into three types, block, reticulate, and Widmanstatten structures.

Eutectoid cementite:
Eutectoid cementite refers to the cementite found in pearlite.

Secondary cementite
When iron-carbon alloys are slow cooled, such as hypoeutectic iron, hypoeutectic iron cast iron, and hypereutectic iron cast iron), the carbon content in austenite is saturated. The cementite will then precipitate along austenite’s grain boundary, with a network distribution in microstructure. This is secondary cementite, which is precipitated from austenite.

Tertiary cementedite:
The equilibrium cooling temperature of industrial pure iron falls below the solid solution line for carbon in iron (Fe – C equilibrium diagram PQ line). At this point, the solubility in carbon in ferrite becomes saturated and the temperature drops again. This causes the tertiary cemented to precipitate from the ferrite. Because of its small amount, the Tertiary Cementite is precipitated from the Ferrite grain boundary. It generally spreads intermittently along that boundary.

It refers only to those that exist outside of the mechanical mixture (structure), such a pearlite (eutectoid) or ledeburite.

Iron Carbide Fe3C Powder Price
Price is affected by many factors, including supply and demand, industry trends and economic activity.
You can email us to request a quote for the latest F3C powder price. (brad@ihpa.net)

Iron Carbide Fe3C Powder Supplier
Technology Co. Ltd. is a trusted global supplier and manufacturer of chemical materials. We have more than 12 years experience in producing super high-quality chemicals.
Send us an inquiry if you are interested in high-quality Fe3C Powder. (brad@ihpa.net)

Or iron caride is an iron-carbon compound, or, more precisely, an intermediate transitional metal carbide having the molecular formula F3C. It weighs 6.67% and 93.3% […]

Silver Carbonate – What Is It?

Silver Carbonate: What Is It?

It is a transition metal carbonate with the formula Ag2CO3 and is widely used as a chemical intermediate in organic reactions. It is also used in the manufacturing of fireworks and as a pigment for photography.

Silver Carbonate Can Be Precipitated From Sodium Carbonate

When you combine silver nitrate with another of the transition metal carbonates, it will precipitate out and you can use it as an oxidant in the Fetizon reaction.

Fetizon’s Reagent is Made With Silver Carbonate And Celite

When Fetizon combines silver carbonate with an alkaline carbonate, such as celite, a white mass forms that, when washed, turns yellow as the soluble salts separate. This reagent is used to oxidise primary and secondary alcohols, yielding ketones and aldehydes, respectively.

General Reactions With Silver Carbonate

A wide range of organic transformations involving Ag2CO3 have been reported, including carboxylations, halogenations, C-H bond functionalizations, and cycloadditions. For example, Zou and co-workers reported a direct C(sp2)-H phosphorylation of indoles in the presence of Mg(NO3)2 leading to phosphoindoles (Scheme 45) [62].

A number of other organic transformations have been catalyzed by Ag2CO3 in recent years, including C-C/N-H oxidative cross-coupling and cyclization reactions, which produce useful intermediates such as furans and pyrroles. Additionally, Ag2CO3 is frequently used in palladium-catalyzed C-H activations in organic solvents with acidic protons, as an oxidant for single-electron transfer (SET) processes, and as an inorganic base for Wittig reactions. These reactions offer valuable synthetic routes to access potentially bioactive phosphorus-containing heterocycles.

Silver Carbonate: What Is It?It is a transition metal carbonate with the formula Ag2CO3 and is widely used as a chemical intermediate in organic reactions. […]

What is Zirconium Diboride Powder?

What is it? Zirconium Diboride powder ? Zirconium Diboride (ZrB2), a type of high covalent ceramic material with hexagonal crystal structures, is one example. It is an ultrahigh-temperature ceramic (UHTC), having a melting temperature of 3246degC. It is a very low density at 6.09 g/cm3 (though it may have a higher density due to hafnium inclusions) and has excellent high-temperature resistance, making it suitable for high-temperature aerospace uses such as hypersonic flight and rocket propulsion systems. It is an uncommon ceramic with high thermal conductivity and electrical conductivity.
The key features of Zirconium Diboride Powder
Zirconium boride is a gray-colored crystal found in nature. Three components of zirconium boreide are zirconium biboride (zirconium diboride), zirconium tribromide (zirconium tribromide) and zirconium bromide (zirconium boride). Only zirconium tribromide is stable across a wide temperature range. The industrial production uses mainly zirconium boride. Zirconium dioxide is a hexagonal or gray crystal, powder, or crystal with a melting temperature of 3040. Zirconium dioxide is highly resistant to high temperature. It also has high strength at high and normal temperatures. High resistance to high temperatures, good shock resistance and low resistance to oxidation. With metallic luster. It is metallic. The resistance to it is slightly lower than zirconium. Stabilizes at all temperatures after heating. It can be sintered at lower temperatures, despite having a high melting point.

Zirconium Diboride Properties
Other Titles	zirconium boride and ZrB2 powder
No.	12045-64-6
Combination Formula	ZrB2
Molecular Weight	112.8
Appearance	Gray to Black Powder
Melting Point	3246 degC
Boiling Point	N/A
Density	6.09 g/cm3
Solubility of H2O	N/A
Exact	111.923315 g/mol

Zirconium Diboride ZrB2 Powder CAS 12045-64-6

The applications Zirconium Diboride Powder
1. Zirconium Diboride is a strategic material that has high hardness and high thermal conductivity. It also has good oxidation resistance, corrosion resistance, and oxidation resistance. It is used mostly in the thermal protection system, high-temperature electrodes, heat trap pipes and reentry planes.
2. Zirconium Diboride can be used in aerospace as a high temperature resistant material. It is particularly well-suited for use on the surface of a rolling bearing ball.
3. Zirconium boride is a great candidate material to make thin-film electronic components for sensors, actuators, and microsystems operating at high temperatures. This is due to its metal-like conductivity as well as melting temperature of 325°C.
4. Zirconium boride is used in special ceramics refractories industries, nuclear industry and military industry. Zirconium boride can also be used to coat rolling balls or smooth solid materials. Composites made of carbon fiber reinforced zirconium dimoride composite are high in density. However, the composites made from silicon carbide fiber reinforced zirconium dimoride composite are brittle.
The supplier Zirconium Diboride Powder
Tech Co., Ltd. () is a professional boride powder Over 12 years’ experience in chemical products development and research. We accept credit cards, T/T and West Union payments. We will ship goods overseas via FedEx, DHL and by air or sea to our customers.
You can find high-quality powdered boron carbide here Please contact us Send an inquiry

What is it? Zirconium Diboride powder ? Zirconium Diboride (ZrB2), a type of high covalent ceramic material with hexagonal crystal structures, is one example. It […]

Recent articles