If you are looking for high-quality products, please feel free to contact us and send an inquiry, email: brad@ihpa.net
Molybdenum disulfide
It has a broad range of application and excellent properties, so much research has been conducted on its preparation and use at home as well as abroad.
Natural law
MoS2 may be prepared naturally, using the molybdenite concentrat purification method. The method involves removing the acid-insoluble matter (SiO2, Fe, Copper, and molybdenite) from a molybdenum concentration of high quality through physical and chemical action. The nano-MoS2 obtained is refined further to remove impurities, such as Ca and Cu. This nano-MoS2 is suitable for lubricants, as it has excellent lubricating properties and can retain the MoS2 crystal form. The nano-MoS2 that is produced using the natural method has a low purity, and purification technologies need to be improved. If the temperature of the atmosphere is less than 400, the cheaper MoS2 is recommended. MoS2 offers a better lubricating effect below 1300 degrees.
Chemical Synthesis
Synthetic methods are able to prepare sulfides in a variety of functionalities. They can also produce sulfides containing high purity and fewer impurities. Synthetic methods have always been popular for producing nano-sulfides. There are several methods of preparing nano MoS2, including ammonium trithiomolybdate thermal oxidation, hydrogen sulfide, sulfur vapor reduction, high energy ball milling, carbon nanotube confinement, hydrothermal synthesis, high energy physical method and chemical combination, among others. There are essentially two ways to prepare nano-MoS2. You can reach nano-MoS2 directly by reacting either a tungsten, molybdenum or sulfur source.
Useful Information
As an effective anti-friction agent, molybdenum disulfide The raw materials of brake pads include four parts: binder, reinforcing fiber, friction performance modifier, and filler. Four parts make up the composition of brake pads: reinforcing fibers, binders, friction performance modifiers, and fillers. The friction performance modifiers fall into two different categories.
(1) Anti-friction material: Addition of this material can increase the material’s resistance to abrasion, reduce the noise level, and lower the coefficient friction. Such materials are mainly graphite (or molybdenum), lead, or copper.
(2) Friction material The friction coefficient can be increased by adding this material. Most inorganic materials and metals and oxides of some metals are included in this category. The friction modifier is primarily used to adjust the thermal stability of a material as well as its working stability.
Molybdenum diulfide offers good dispersibility and wear resistance as well as noise reduction. Addition of molybdenum disulfide to brake pads has the following main functions:
Anti-friction: Molybdenum Disulfide processed through jet pulverization can have a particle size between 1.5-20 microns. It has an excellent dispersion and anti-friction performance.
Increased friction The friction material becomes more aggressive due to the increased friction temperature. Molybdenum dioxide oxidizes and forms molybdenum trioxide.
Anti-oxidant, anti-falling and other: Molybdenum Disulfide is a little acidic. It protects the surface of friction materials against oxidation, makes it hard to fall off and has strong adhesion.
Expansion: The internal voids can increase when the friction material is heated to a high temperature. However, molybdenum oxide can compensate for this.
Reduce the specific gravity The specific gravity for molybdenum diulfide is between 4.5-5.2. The fineness increases the surface area, which in turn decreases the specific gravity.
(aka. Technology Co. Ltd., a global chemical material manufacturer and supplier with over 12 year’s experience in providing high-quality nanomaterials and chemicals. The molybdenum disulfide Please note that the products produced by our company are of high purity and have low impurity. Please. Contact us if necessary.
Natural law
MoS2 may be prepared naturally, using the molybdenite concentrat purification method. The method involves removing the acid-insoluble matter (SiO2, Fe, Copper, and molybdenite) from a molybdenum concentration of high quality through physical and chemical action. The nano-MoS2 obtained is refined further to remove impurities, such as Ca and Cu. This nano-MoS2 is suitable for lubricants, as it has excellent lubricating properties and can retain the MoS2 crystal form. The nano-MoS2 that is produced using the natural method has a low purity, and purification technologies need to be improved. If the temperature of the atmosphere is less than 400, the cheaper MoS2 is recommended. MoS2 offers a better lubricating effect below 1300 degrees.
Chemical Synthesis
Synthetic methods are able to prepare sulfides in a variety of functionalities. They can also produce sulfides containing high purity and fewer impurities. Synthetic methods have always been popular for producing nano-sulfides. There are several methods of preparing nano MoS2, including ammonium trithiomolybdate thermal oxidation, hydrogen sulfide, sulfur vapor reduction, high energy ball milling, carbon nanotube confinement, hydrothermal synthesis, high energy physical method and chemical combination, among others. There are essentially two ways to prepare nano-MoS2. You can reach nano-MoS2 directly by reacting either a tungsten, molybdenum or sulfur source.
Useful Information
As an effective anti-friction agent, molybdenum disulfide The raw materials of brake pads include four parts: binder, reinforcing fiber, friction performance modifier, and filler. Four parts make up the composition of brake pads: reinforcing fibers, binders, friction performance modifiers, and fillers. The friction performance modifiers fall into two different categories.
(1) Anti-friction material: Addition of this material can increase the material’s resistance to abrasion, reduce the noise level, and lower the coefficient friction. Such materials are mainly graphite (or molybdenum), lead, or copper.
(2) Friction material The friction coefficient can be increased by adding this material. Most inorganic materials and metals and oxides of some metals are included in this category. The friction modifier is primarily used to adjust the thermal stability of a material as well as its working stability.
Molybdenum diulfide offers good dispersibility and wear resistance as well as noise reduction. Addition of molybdenum disulfide to brake pads has the following main functions:
Anti-friction: Molybdenum Disulfide processed through jet pulverization can have a particle size between 1.5-20 microns. It has an excellent dispersion and anti-friction performance.
Increased friction The friction material becomes more aggressive due to the increased friction temperature. Molybdenum dioxide oxidizes and forms molybdenum trioxide.
Anti-oxidant, anti-falling and other: Molybdenum Disulfide is a little acidic. It protects the surface of friction materials against oxidation, makes it hard to fall off and has strong adhesion.
Expansion: The internal voids can increase when the friction material is heated to a high temperature. However, molybdenum oxide can compensate for this.
Reduce the specific gravity The specific gravity for molybdenum diulfide is between 4.5-5.2. The fineness increases the surface area, which in turn decreases the specific gravity.
(aka. Technology Co. Ltd., a global chemical material manufacturer and supplier with over 12 year’s experience in providing high-quality nanomaterials and chemicals. The molybdenum disulfide Please note that the products produced by our company are of high purity and have low impurity. Please. Contact us if necessary.