Tag: graphite

Introduction to Graphite Powder

What uses is graphite? It’s used as a demolding lubricant for the production of chemical fertilizer industrial catalysts.
Graphite is a graphite powder that has high-temperature resistance and high lubricity. It can also be used as a high-temperature resistant lubricant and corrosion resistant lubricant.
It can be used to release powder metallurgy, as a metal alloy raw material, or as a lubricant in cable manufacturing.
It’s used for making carbon film resistor, dry mode conductive and preparing conductive coat.
To make fillers and performance enhancers of rubber, plastics, or any other type of composite material to increase wear resistance, pressure resistance, conductivity, or resistance.
Natural graphite can be used to mark pencils, motor brushes, and other professional applications.
An innovative application for nuclear-grade graphite are the ultra-high temperature reactor (UHTR), as well as the next generation nuclear power plants (NGNP).

What is graphite?
Graphite is a form of graphite, but it’s only a powder. This retains all its primary and secondary characteristics.
Graphite, an allotrope for carbon, is called graphite. It is opaque solid and grayish-black. It is oily and can pollute paper.
It has a hardness level of 1-2. With an increase in vertical impurities, the hardness will rise to 3-5. The specific gravity ranges from 1.9 to2.3. The specific surface area of the mineral is limited to 1-20m2/g. Under the condition of oxygen isolation, its melting point is above 3000, so it is one of the most temperature-resistant minerals. It can conduct heat and electricity.
Chemical stability, corrosion resistance. It is not easy to react against acid, alkali, or other agents. Graphite reacts with oxygen to produce carbon dioxide. Strong oxidants, such as potassium permanganate and concentrated nitric Acid, can oxidize graphite.
Natural graphite is not pure, so it often contains impurities, such as SiO2, Al2O3, FO, CaO and P2O5, or CuO. These impurities can often be found in the form quartz, pyrite or carbonate as well as other minerals. Water, asphalt, CO2, H2,CH4,N2 and other gases are also present. The analysis of graphite requires that, in addition to determining the fixed carbon content, volatile matter and Ash must be done simultaneously.

Is graphite dust toxic?
Exercising too much graphite can damage the respiratory system. There have been documented health effects such as pulmonary fibrosis or pneumoconiosis. This is an occupational lung disease. Workers’ lung function and cardiovascular system may also be affected.

What can you substitute for graphite powder in
Although graphite powder can be used as a dry lubricant, it can corrode aluminum when moisture is present. Graphite can be substituted by molybdenum-dioxide MoS2 powder.

Graphite Powder Pricing
Price is affected by many factors, including supply and demand in a market, industry trends and economic activity.
Send us your inquiry if you’re interested in the current graphite price. (brad@ihpa.net)

Graphite Pulver Supplier
Technology Co. Ltd. is a trusted global supplier and manufacturer of chemical materials. We have more than 12 years experience in producing super high-quality chemicals.
Send us an inquiry if you are interested in graphite powder of high quality. (brad@ihpa.net)

What uses is graphite? It’s used as a demolding lubricant for the production of chemical fertilizer industrial catalysts. Graphite is a graphite powder that has […]

High purity graphite powder is one of the most widely used materials in the future

What is high purity graphite? High-purity, graphite powder has a carbon level of over 99.99%. It is widely used for advanced refractory materials, coatings in metalurgical industry and stabilizers for military pyrotechnical products in the military industry. Carbon brushes in electrical industry and industrial electrodes. Chemical fertilizer industry catalyst additions. High-purity graphite has many advantages, including high strength, low resistance to thermal shock, resistance to high temperatures, resistance against oxidation and corrosion, and precision machining. It is an excellent inorganic, non-metallic material. Used to process and manufacture electric heating elements.
The following features are characteristic of high purity graphite dust:
High-purity Graphite features high strength, density, high purity and chemical stability. It is compact and uniform in structure, high resistance to heat, high conductivity and good wear resistance. It can also be self-lubricating and easy to process.

If the 20th Century was the era for “silicon”, then carbon materials will be the most rapidly growing and widely used material in the 21st. Advanced carbons, such as graphene materials (graphene materials), isotropic nuclear graphite, synthetic diamond, flexible graphite and lithium battery anode material, are becoming more important in our daily lives and military operations.
1. In the lithium battery industry, high-purity graphite is used.
Natural graphite is the base material for graphite-anode materials. The process of making artificial graphite requires that it undergoes calcination carbonization, high-temperature graphitization and coating. However, natural graphite is first subject to processes such alkaline acid beneficiation purification or ultra-high temperature purification. Both natural and artificial graphite need to be purified or graphitized at high temperatures before being used in the manufacture of lithium batteries. The Shaanxi six-element carbon-carbon crystal high-temperature Graphite purification technology and the high-temperature Graphitization Technology are key technologies in the field graphite anode substances.
2. High-purity graphite dust is used in the graphene manufacturing industry.
The graphite oxide reduction technique is the most promising and promising method to synthesize graphene and other graphene materials. The graphiteoxide reduction method uses high-purity natural flake Graphite as its main raw material.
3. High-purity powdered graphite is used in isotropic nuclear graphite production.
It is crucial to expand the supply of high-purity, natural microcrystalline microcrystalline graphite. This is a great raw material for nuclear Graphite.
4. The artificial diamond industry uses high-purity powder graphite.
Natural flake graphite dust is the main ingredient in synthetic artificial diamond. Scientists have found that product quality is directly affected by the purity of graphite and the graphitization level of graphite. The product’s quality will be higher if it is made of high-purity graphite materials. It is crucial to ensure the highest quality artificial diamond products.
5. In the manufacture of military graphite bombs, high-purity powdered graphite is used.
High-purity, high-purity graphite is used as the raw material to produce graphite bombs.
6. Flexible graphite is made from high-purity powder graphite.
The unique use potential and wide development opportunities of flexible graphite are summarized in this summary. But, purity is an important consideration in the production process. Chemical acid purification often damages or affects the exceptional material properties. However, high temperature physical purification has obvious benefits.
7. In other industries, high-purity graphite is used.
Natural high-purity graphite has many advantages, including high temperature resistance and excellent electrical and thermal conductivity. It is used in a wide variety of industrial applications, including coatings for stealth planes, chemical, electronic, machinery, and many other fields.
Tech Co., Ltd. is a supplier of high purity graphite powder with more than 12 years’ experience in chemical products research. We accept payments via Credit Card and Paypal. We will ship goods overseas via FedEx, DHL and by air or sea to our customers.

What is high purity graphite? High-purity, graphite powder has a carbon level of over 99.99%. It is widely used for advanced refractory materials, coatings in […]

High Purity Graphite Powder and its use

What is High Purity Graphite Pulp? High Purity Graphite Pulver It uses advanced production equipment and testing instruments to create high-purity, low-carbon Nanoscale graphite powder. This is used in lubrication and lubricating, wire draw, conductive, ink and other industries.
High Purity Graphite Pulp has many uses. Add the required amount of High Purity Graphite Pulver A graphite-lubricating coating can be formed by the oil under high-temperature friction. This significantly reduces the friction coefficient. It is a good choice for machinery industries as it protects equipment and helps to reduce maintenance costs. It can be used to reduce the cost of fuel oil in the automotive industry. It can also be used to completely burn fuel oil and reach the goal for environmental protection.
Specifications and characteristics for High Purity Graphite Pulp
High Purity Graphite Powder has been prepared using a special process. It is extremely pure, small and uniform in particle size, and it exhibits high surface activity. It can be used to make coatings and resins. Surface-treated high purity graphite powder can eliminate the problem with dispersion.
Specifications: F, TF, FS

Particle size: 1mm-38mm (325 mesh-12500 mesh), carbon content: 90%-99.9%, moisture: 0.5%
Performance: This graphite powder has the same performance as high-quality natural ultrafine graphite, and it is also resistant to oxidation in high-temperature environments. The graphite powder is self-lubricating and has plasticity. It also exhibits good thermal conductivity and electrical conductivity.
High Purity Graphite Pulver Application
Nano-graphite can be used for a variety of purposes, such as electronic information pictures tubes, black conductive coats in the display industry, and many other uses. Useful in high lubrication; high conductivity; chemical industry, steellubrication, aerospace, among other fields.
High Purity Graphite is used in lubricants and anticorrosion coatings.
Other uses of High Purity Graphite Powder
(1) Graphite powder is a mold release lubricant that can be used to produce catalysts for the chemical fertilizer industry.
(2) Graphite is a powder that has high-temperature resistance, high lubricity, and can be used in lubricants that are resistant to corrosion and high temperatures.
(3) It can also be used as a powder-metallurgy release agent, a metal alloy raw material, and a lubricant during cable production.
(4) Used to make carbon film resistors and conductive dry molds.
(5) Used as a filler for rubber, plastic and composite materials to increase the wear resistance, compression resistivity, or conductivity.

(aka. Technology Co. Ltd. (aka. High Purity Graphite Powder is made by our company with high purity, fine particles size, and low impurity. Please Please contact us if necessary.

What is High Purity Graphite Pulp? High Purity Graphite Pulver It uses advanced production equipment and testing instruments to create high-purity, low-carbon Nanoscale graphite powder. […]

Modification of Natural Graphite and Artificial Graphite

The difference in processing technology and raw materials will determine the final product. graphite powder Natural graphite is separated from artificial graphite. Graphite is an excellent choice for anode materials in lithium-ion batteries because of its low lithium cost and high efficiency.

Analyse of natural graphite

Natural flake graphite can be used to make natural graphite. It is then modified to produce spherical natural Graphite. Although natural graphite has many advantages, there are some drawbacks to it.
Natural graphite exhibits many defects on the surface, high specific area and low efficiency.

PC-based electrolyte can cause serious problems such as solvated lithium Ion co-embedding. This leads to graphite peeling and expansion, and ultimately, battery performance failure.

The anisotropy of natural graphite means that lithium ion is difficult to embed from the end faces. It also makes it easy for lithium ions to be precipitated. The majority of artificial graphite is made from dense petroleum coke, needle coke, or other precursors. However, there are some issues such as poor magnification, low temperatures performance, and easy separation of lithium.

Modifications to natural graphite

Different surfactants were applied to the graphite to fix its surface imperfections and toler electrolyte well.

To improve magnification of natural graphite, the first step is to modify the surface pore structure. After etching with strong alkali (KOH), the solution was diluted in aqueous water.

You can also use strong oxidants to treat the surface of graphite. This will passivate it and make natural graphite more efficient.

Third, fluorinate natural graphite by using ClF3. Effectively, the cycle life and charge/discharge ratio are improved.

The amorphous graphite can also be coated to form “coreshell” structures. The carbon source for amorphous Carbon is typically pitch, phenolic or other low temperature pyrolytic material. Because of the long distance between carbon layers, the presence of a carbon coating can reduce interfacial impedance and isolate electrolyte from the particles. Enhance the intercalation or diffusion of lithiumion.

To solve the anisotropy problem in natural graphite, mechanical treatments are often employed to shape the particle morphology. An air flow shaping device uses wind to create particles that rub against each others and to cut corners. The method doesn’t introduce any doping impurities. It has high efficiency and will result in the pulverization a large amount of particles with low yield.

Mechanical fusion machines use the material to spin at high speeds in a rotor. The material clings on to the wall with the help of centrifugal force and then passes between the stator extrusionhead and the rotor at high velocity. This is when the material will be subject to extrusion force and shear pressure. To achieve the goal of spheroidization, the surface is subject to the friction between particles and other particles.

Natural graphite’s particle sizes are reduced to 15-20 mm after the spheroidization process. The first efficiency and performance of the cycles is clearly improved. Magnification performances can also be greatly enhanced.

Modifications to Artificial Graphite

Modifications of artificial graphite. The modification process of artificial graphite has a different structure than that of natural graphite. Reorganizing the particle structure of graphite can reduce the OI value (position degree) of graphite grains. A needle coke precursor of between 8-10mm in diameter is chosen. The carbon source for the binder is typically asphalt. A number of needle coke particles can be bonded using drum furnace treatment. The secondary particles, with a size of between 14-18mm, are used for graphitization. This will reduce the Oi values of the material.

Graphite Powder Pricing

Price is affected by many things, such as the demand and supply in the market and industry trends. Economic activity. Unexpected events.
You can email us to request a quotation if you want the current graphite price. (brad@ihpa.net)

Graphite Pulver Supplier

Technology Co. Ltd. has over 12 years of experience as a reliable natural graphite supplier and manufacturer. All of our products can be shipped worldwide.

You can find high-quality, natural flake graphite powder here. Get in touch You can also send us an inquiry. (brad@ihpa.net)

The difference in processing technology and raw materials will determine the final product. graphite powder Natural graphite is separated from artificial graphite. Graphite is an […]

Recent articles