What is silicon monoxide?

If you are looking for high-quality products, please feel free to contact us and send an inquiry, email: brad@ihpa.net

What is Silicon Monoxide? ? Silicon monoxide The chemical formula for SiO is an inorganic substance. It is an amorphous black-brown powder that turns yellowish under normal temperatures and pressure. It has a melting and boiling point of 1802degC respectively. The density of the powder is 2.13g/cm3. It is not very soluble in liquid water. However, it can dissolve in a mix of dilute hydrofluoric acids and nitrics and produce silicon tetrafluoride. When heated in air, this produces white silica. The silicon monoxide in the air will oxidize and become silicon dioxide. When the silicon monoxide vapour is slowly condensed (see disproportionation reactions), it will disproportionate into silicon and silica dioxide.
Silicon monoxide preparation
1. After silicon dioxide has reacted with elemental silicon, rapid cooling is required to make silicon monoxide.
SiO2 + S – 2SiO.
2. Mix silicon dioxide with SiO2 of 99.5% with coal tar powder. The C/SiO2 molar mixing ratio is 2.0. Heat the mixture under reduced pressurized, at a temperature of 1600 and a pressure of 1.013 kPa.

Property and stability properties of silicon monoxide
Silicon monoxide The material is not stable. It will be oxidized into silicon dioxide in air and is only stable when temperatures are above 1200degC.
Avoid open flames and high temperatures. It is insoluble with water and soluble with a mix acid of dilute hydrofluoric acids and nitric Acid. Heat and electricity are well insulated by this material. It is oxidized in air and forms a silicon oxide film. In oxygen, it burns and then reacts with the water to produce hydrogen. In the warm alkaline solution, hydrogen is produced and silicate is dissolved.
Silicon monoxide use
A fine powder of silicon monoxide can be used to synthesize fine ceramics due to its high activity. This includes silicon carbide and silicon nitride. Useful in the preparation optical glass and semiconductors.
As a protective layer, evaporate the material in a vacuum. Preparation semiconductor materials.

Silicomonoxide and its hazards
In the event of eye contact, rinse with lots of water immediately and take to a doctor.
Wear protective clothing.
Eyes, skin, and respiratory tract are all affected.
Most water bodies are only mildly affected by this substance. Do not allow large quantities of undiluted products to enter groundwater, waterways or sewage system.
Avoid light, open flames and high temperatures.
Place in a ventilated, dry and airtight place.
Inhalation: Move the patient to fresh, clean air if inhaled.
Skin contact: Remove all contaminated clothing. Wash your skin with soap and warm water. Seek medical attention if you feel unwell.
Eye contact: Separate eyelids, and rinse them with normal saline. Seek medical attention immediately.
Ingestion: Rinse your mouth and do not vomit. Seek medical attention immediately.
Advice for protecting rescuers – Move the patient into a safe area. Consult with a doctor. The doctor should see this sheet of chemical safety information.

(aka. Technology Co. Ltd., a global leader in chemical materials and nanomaterials with over 12 year’s experience as a supplier of high-quality chemicals. Silicon monoxide is produced by our company with a high level of purity, small particles and impurities. Please. Contact Us if necessary.